Density Meter for the Petroleum Industry: DMA™ 4200 M

Name: Density Meter for the Petroleum Industry: DMA™ 4200 M
SKU: 506
Rating: 3.30 (449 reviews)

Rated 3.30 out of 5 based on 339 customer ratings

The DMA™ 4200 M density meter measures all of your petroleum samples, including crude oil, intermediate products, asphalt, bitumen, liquefied petroleum gas and high-viscosity liquids. Using DMA™ 4200 M means that tedious, manual and time-intensive measurement with pycnometers or hydrometers is a thing of the past. Only 2 mL of sample is needed and even viscous samples are filled easily. Measurement in a temperature range from -10 °C up to 200 °C even allows density checks on samples which are solid at room temperature. DMA™ 4200 M automatically calculates the density values for the required reporting temperature using the built-in API tables, without the need for manual temperature compensation. After measurement, the DMA™ 4200 M sample cell is quickly cleaned with only a small amount of solvent.

Request a Quote

Category: Density Meter Tags: Anton Paar Density Meter, Density Meter

Key Features Density Meter DMA™ 4200 M

Speeds up your density checks

Ten times faster than with traditional methods
Only 2 mL of sample required
Easy filling, even of samples which are solid at room temperature
Automatically calculates the density values for the required reporting temperature using the built-in API tables, without manual temperature compensation
The sample cell is quickly cleaned with only a small amount of solvent

Many tasks at many locations

For incoming crude oil, checks on intermediate samples and QC of asphalt, bitumen and LPG
Accessory for filling LPG available
Accessory for filling hot asphalt/bitumen samples available
Measurement under pressures of up to 500 bar
Replaces pycnometers and hydrometers

A heart stronger than steel

The heart of DMA™ 4200 M is a U-tube made of Hastelloy, which has a much higher chemical resistance to hydrochloric acid and sour gas than stainless steel
Long-life with no risk of breakages or corrosion

Technnical Spesification

Measuring range
Density	0 to 3 g/cm³
Temperature	-10 to +200 °C (14 to 392 °F)
Pressure	0 to 500 bar (0 to 7,250 psi)
Accuracy
Density	Up to 0.0001 g/cm³
Temperature	0.03 °C (0.037 °F)
Repeatability s.d
Density	Up to 0.00005 g/cm³
Additional information
Cell material	Hastelloy C-276
Volume of the measuring cell	approx. 2 mL
Dimensions / Weight	510 x 330 x 230 mm / 27.1 kg (20 x 13 x 9 inches / 59.7 lbs)
Power supply	AC 100 to 240 V , 50 to 60 Hz, 250 VA
Connections	Pressure fittings for metal tubes with 1/8″ outer diameter
Interfaces	4 x USB (2.0 full speed), 2 x S-Bus, 1 x Ethernet (100 Mbit), 1 x CAN Bus, 1 x RS-232, 1 x VGA